Vook DVR User Manual download pdf (Page 12)

CONNECTION AND SETUP

Step4: Align the screw hole on the each bracket with the screw hole on the each side of

the HDD as shown below, and fix the HDD to the bracket with a HDD screw

supplied.

Step5: Close the upper cover of the DVR, and fasten all the screws you loosened in Step 1.

2.2 Camera Connection

The cameras must be connected and power-supplied before the DVR is powered on.

Connect the camera with the indicated power supply. Then, connect the camera video

output to the DVR video input port with a coaxial cable or RCA cable with BNC

connectors.

Note: For detailed DVR video input ports, please refer to “1.3 Rear Panel” at page

2.2.1 Normal Camera Connection

Note: For detailed camera installation and connection, please refer to its own user

manual.

1) Connecting to DVR video input

Connect the camera video output to the DVR video input port with a coaxial cable or

RCA line with BNC connector.

2) Connecting to DVR audio input (Optional)

Connect the camera audio output to the DVR audio input port with a coaxial cable or

RCA cable with BNC connectors.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

No comments

Vook DVR User Manual Page 12