Vook DVR User Manual download pdf (Page 13)

CONNECTION AND SETUP

3) Connecting to power

Connect the camera with indicated power supply and make sure it’s power-supplied.

2.2.2 PTZ Camera Connection

The following description is taking our brand’s PTZ camera as an example.

For DVR setting to control the PTZ camera, please refer to “5.5 PTZ Camera Setting” at

page 23. For detailed PTZ camera control and operation, please refer to its own user

manual.

RJ11 cable

RS485-A: Red wire

RS485-B: Green wire

The RJ11 cable is not supplied in the sales package.

STEP 1: Get a RJ11 cable with the proper length to your connection.

Different RJ11 connector may have different wire layout, so the connection

might be different. If you cannot control the DVR after connection, please

reverse the RJ11 cable connection with the DVR.

STEP 2: Remove one end of the insulating coating of the RJ11 cable.

Remove one end of the insulating coating of the RJ11 cable to find the

RS485-A and the RS485-B wires, and remove the insulating coating to reveal

the naked wires for further connection.

STEP 3: Twist the RS485-A and RS485-B wires of the RJ11 cable and the speed

dome camera together.

Twist the RS485-A (red) and RS485-B (green) wires of the RJ11 cable to the

RS485-A (brown) and RS485-B (orange) wires of the speed dome camera. To

protect the naked wires, use the insulation tape to cover on the twisted wires.

STEP 4: Connect the other end of the RJ11 cable to DVR.

Solder the RS485-A (red) and RS485-B (green) wires of the RJ11 cable to the

corresponding pins on the solder side of the optional D-Sub connector.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

No comments

Vook DVR User Manual Page 13