Vook DVR User Manual download pdf (Page 28)

FREQUENTLY-USED FUNCTIONS

Note: The default setting of SS is 03, which means once an object is detected

more than 3 grids, the system will get triggered. So the value of SS must be

less than the number of grids that you set up for the motion detection area.

3) TS (Time of Sensitivity)

“TS” is to set the sensitivity regarding how long one object stays in the detection

area and triggers the recording. The smaller the value is, the higher sensitivity for

motion detection.

The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The

default setting is 02.

4) DET

Select if you want to activate the motion detection function for the selected channel

(ON/OFF).

5) ALARM

Select N.C./ N.O depending on your installation need. The default alarm value is

OFF.

6) AREA

Click “EDIT” to set the motion detection area.

There are 16 × 12 grids per camera for all channels. Pink blocks represent the area

that is not being detected while the transparent blocks are the area under

detection.

5.5 PTZ Camera Setting

Right-click to display the main menu, and select “ADVANCE CONFIG”  “REMOTE”.

ADVANCE CONFIG

C A N E R A CH1 CH2 CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11 W

DETECTION DEVICE PTZ

ALERT ID 00

NETWORK PROTOCOL NORMAL

SNTP RATE 2400

DISPLAY

RECORD

REMOTE

EXIT

1) DEVICE

For the PTZ camera, select “PTZ”.

2) ID

Click the current value to set the ID number (0 ~ 255) for the connected PTZ

camera if necessary.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Comments to this Manuals

No comments

Vook DVR User Manual Page 28

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Vook DVR