Vook DVR User Manual download pdf (Page 15)

CONNECTION AND SETUP

2.4 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR FIRST.

Note: Please DO NOT change the date or time of your DVR after the recording

function is activated. Otherwise, the recorded data will be disordered and

you will not be able to find the recorded file to backup by time search. If

users change the date or time accidentally when the recording function is

activated, it’s recommended to clear all HDD data, and start recording

again.

Note: For the first time to use the DVR, please power it on for at least 48 hours

continuously after the date & time is set correctly. It helps to prevent DVR

time from resetting after the disconnecting of DVR power. If the DVR time

resets after the disconnecting of DVR power, for example, caused by a

power outage, the battery might run out and please replace the battery as

described in “APPENDIX 5 DVR BATTERY REPLACEMENT” at page 52.

Right-click to enter the DVR password with the password keypad. The default

administrator password is 0000. The status will be changed from (key lock) to

(administrator). Then, right-click to show the main menu, and select “QUICK START” 

“TIME SETUP” to set the date & time.

QUICK START

GENERAL

DATE 2009 / NOV / 17

TIME SETUP

TIME 15 : 35 : 53

EXIT

2.5 Clear Hard Disk

It’s recommended to clear all data in the hard disk for the first time to user this DVR to

ensure the recorded data are not mixed with other data previously saved in the same

hard disk.

Right-click to show the main menu, and select “SYSTEM”  “SYSTEM INFO” 

“CLEAR HDD”. The DVR will reboot when HDD data are cleared.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

No comments

Vook DVR User Manual Page 15